Skip to main content
search

STONEGATE NEWS
Feb 27 2023

How to hook up a trailer?

By Campers, Trailers

Hooking up a trailer can be done by following these steps:

1. Position the vehicle and trailer: Park your vehicle close to the trailer and make sure that it is level. Make sure that both the vehicle and trailer are on a solid and level surface.

2. Connect the safety chains: Cross the safety chains under the coupler, then attach the hooks to the vehicle’s hitch. This will help prevent the trailer from separating from the vehicle in the event of a hitch failure.

3. Connect the electrical wiring: Connect the trailer’s wiring harness to the vehicle’s wiring system. This will allow the vehicle’s lighting system to control the trailer’s lights.

4. Couple the trailer: Lower the trailer coupler over the ball of the hitch. Check that the coupler is fully seated on the ball and secure the trailer by tightening the locking mechanism.

5. Check the connection and fold up the jockey wheel: Make sure that the connection is secure by gently pulling on the trailer and checking that the coupler does not come loose from the hitch ball.

6. Check the lights: Turn on the vehicle’s lighting system and check that all of the trailer’s lights are functioning properly.

7. Adjust the load: Make sure that the load on the trailer is properly balanced and distribute the weight evenly.

It’s important to always check the weight capacity of both the hitch and the trailer, and to not exceed the recommended weight limits. Additionally, it’s important to practice safe towing techniques and to obey all traffic laws when driving with a trailer.

Feb 27 2023

Do I need insurance for towing a trailer in Queensland?

By Campers, Trailers

It is generally required to have insurance coverage for any trailer you are towing on public roads. The type and amount of insurance required may vary depending on the type of trailer and its intended use.

In Queensland, at a minimum, all registered trailers must have Compulsory Third Party (CTP) insurance, which covers personal injury claims arising from a motor vehicle accident. However, CTP insurance does not cover damage to property or other vehicles.

Here is some information on the types of insurance that may be required when towing a trailer in Queensland:

1. Compulsory Third Party (CTP) insurance: This is the minimum legal requirement for all registered vehicles in Queensland, including trailers. CTP insurance provides coverage for personal injury claims arising from a motor vehicle accident, but it does not cover damage to property or other vehicles. The cost of CTP insurance is included in the registration fee for your trailer.

2. Third Party Property Damage insurance: This type of insurance covers damage caused to other vehicles or property in the event of an accident. If you are found to be at fault for an accident that damages another person’s property, you may be liable to pay for the damages. Third Party Property Damage insurance can help cover those costs.

3. Comprehensive insurance: This is the highest level of insurance coverage available for trailers in Queensland. Comprehensive insurance covers damage to your own trailer as well as damage to other vehicles or property. It can also include coverage for theft or fire damage.

It’s important to note that requirements for insurance coverage may vary depending on the type and weight of the trailer, and it’s always a good idea to check with your insurance provider or relevant authorities for the specific requirements that apply to your situation.

trailer
trailer
Feb 27 2023

How do I know if my car can tow a trailer?

By Campers, Trailers

The suitability of your vehicle for towing a trailer depends on several factors, including:

1. Towing capacity: The towing capacity of your vehicle is the maximum weight it is designed to tow. It’s important to make sure that the weight of the trailer and its contents does not exceed the towing capacity of your vehicle.

2. Engine size and power: The size of your vehicle’s engine and the amount of power it produces can affect its ability to tow a trailer. Larger engines and vehicles with more horsepower will generally have a higher towing capacity.

3. Transmission: The transmission of your vehicle also affects its ability to tow a trailer. Some vehicles, such as trucks and SUVs, are designed with transmissions that are well-suited for towing.

4. Suspension and brakes: The suspension and brakes of your vehicle play a critical role in the safety of towing a trailer. Vehicles with sturdy suspensions and powerful brakes will be better equipped to handle the additional weight and stress of towing a trailer.

5. Hitch: You will need to have a hitch installed on your vehicle to be able to tow a trailer. The type of hitch you need will depend on the weight of the trailer and the towing capacity of your vehicle.

6. Towing accessories: You may also need to invest in additional towing accessories, such as sway bars, weight distribution systems, and electric brakes, to ensure that your vehicle is equipped for towing a trailer.

It’s important to consult the owner’s manual of your vehicle and/or consult with a professional to determine the suitability of your vehicle for towing a trailer.

Overloading or towing a trailer that is too heavy for your vehicle can result in unsafe towing conditions and potential damage to the vehicle or trailer.

Feb 27 2023

Trailer Maintenance and Repairs

By Campers, Trailers

Trailers and caravans require maintenance to ensure that they are in good working condition and can be safely used for towing. Regular maintenance can help prevent breakdowns and extend the life of the trailer or caravan. Here are some common maintenance tasks that should be performed on a regular basis:

1. Tire maintenance: Check the tires for proper inflation, wear, and damage. Replace the tires if necessary.

2. Brake maintenance: Check the brakes for proper operation and make any necessary repairs or adjustments.

3. Lighting maintenance: Check the lights to make sure they are functioning properly and replace any burned-out bulbs.

4. Suspension maintenance: Check the suspension for any signs of wear or damage and make any necessary repairs.

5. Hitch maintenance: Check the hitch for any signs of wear or damage and make any necessary repairs.

6. Lubrication: Lubricate the moving parts of the trailer or caravan, such as the wheels, axles, and hitch, to prevent rust and wear.

7. Cleaning: Clean the exterior of the trailer or caravan regularly to prevent rust and other forms of damage.

It’s important to follow the recommended maintenance schedule for your trailer or caravan, as specified by the manufacturer, to ensure that it is in good working condition and can be safely used for towing.

Feb 27 2023

How do I check if my trailer or caravan is overloaded?

By Campers, Trailers
box trailer brisbane
trailer for sale

Here are some steps to check if your trailer or caravan is overloaded:

1. Check the maximum weight limit: Check the maximum weight limit of your trailer or caravan, as specified by the manufacturer. This information can be found in the owner’s manual or on the label on the trailer.

2. Weigh the trailer: You can weigh the trailer by using a public weigh station, or you can use portable weigh scales specifically designed for trailers.

3. Determine the weight of the load: Make sure to include the weight of any items you are transporting, such as furniture or equipment, as well as any supplies or personal items you are carrying.

4. Calculate the aggregate trailer mass (ATM): The ATM is the sum of the trailer’s tare weight, which is the weight of the trailer when it is empty, and the weight of the load it is carrying.

5. Compare the ATM to the maximum weight limit: If the ATM exceeds the maximum weight limit of the trailer or caravan, it is considered to be overloaded.

6. Adjust the load: If your trailer or caravan is overloaded, you should adjust the load by removing some items or redistributing the weight to ensure that the ATM is within the maximum weight limit.

It’s important to ensure that your trailer or caravan is not overloaded, as this can result in unsafe towing conditions and potential damage to the vehicle or trailer. Regularly checking the ATM and ensuring that the weight is within the recommended limits can help ensure a safe and successful towing experience.

Close Menu
Send a Message
close slider

    Should you have any enquiries, please contact us on 07 3800 1283 or fill out this form below, our team will get back to you as soon as possible.

    Name (Required):

    Email (Required):

    Phone (Required):

    Your Suburb / Postcode (Required):

    Product of Interest (Required):

    Message:

    Preferred Pickup Location:
    Coopers Plains (Brisbane South)Brendale (Brisbane North)Molendinar (Gold Coast)

     

     

    Google Rating
    4.8
    Based on 297 reviews
    js_loader